BJLLW - FOREST GREEN ALKYD CAMOUFLAGE

Product Identification

Product ID:FOREST GREEN ALKYD CAMOUFLAGE
MSDS Date:04/30/1987
FSC:8010
NIIN:01-120-8382
MSDS Number: BJLLW

Responsible Party
EVERSEAL MANUFACTURING CO., INC.
475 BROAD AVENUE
RIDGEFIELD, NJ 07657-2329
US

Emergency Phone: 201-943-4986

Info Phone: 201-943-4986

Preparer: FRANK PRIMERANO

Cage: EO432

Contractor
EVERSEAL MFG CO INC
RIDGEFIELD, NJ 07657-2329 US

Telephone: 201-943-4986

Cage: 72988

Ingredients

RESIN

Fraction By Weight: 21%


COBALT TITANATE - AS CR3

CAS: 68187-49-5

Fraction By Weight: 4%

OSHA PEL AS DUST 0.05 MG/M3


CHROMIUM OXIDE-AS CR3

CAS: 1308-38-9

RTECS: GB6475000

Fraction By Weight: 5%

OSHA PEL AS DUST 0.05 MG/M3


IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 2%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293


SILICA, AMORPHOUS, DIATOMACEOUS EARTH, CONTAINING LESS THAN

CAS: 61790-53-2

RTECS: HL8600000

Fraction By Weight: 8%

OSHA PEL 20 MPPCF

ACGIH TLV: 10 MG/M3 TDUST; 9293


TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 17%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192


5 G/KG ORAL)

CAS: 64742-86-5

RTECS: LX3296500

Fraction By Weight: 36%

OSHA PEL 120 PPM

Hazards

LD50 LC50 Mixture:5 G/KG (ORAL)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:PROLONGED EXPOSURE TO DUST FROM
SANDING, GRINDING OR BLASTING MAY CAUSE LUNG DISORDERS - USE
APPROPIRATE PROTECTION DURING THESE OPERATIONS.
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA, UNCONSCIOUSNESS.
IRRITATING TO SKIN AND EYES.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION
IF NECESSARY. SKIN: WASH WITH SOAP & WATER. EYES: FLUSH WITH WATER.
CONSULT PHYSICIAN.

Fire Fighting

Flash Point:105 F/41 C
Lower Limits:1
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-C0NTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING MEDIA

Accidental Release

Spill Release Procedures:ABSORB SMALL SPILLS ON DRY ABSORPTION MEDIA.
USE SPARK-PROOF SCOOP FOR LARGER SPILLS. ENSURE ADEQUATE
VENTILATION. REMOVE OPEN IGNITION SOURCES.

Handling

Handling and Storage Precautions:AVOID EXCESSIVE HEAT OR OPEN IGNITION
SOURCES
Other Precautions:NPCA/HMIS RATING 3,2,0,H

Exposure Controls

Respiratory Protection:VAPOR CARTRIDGE MASK OR AIR-SUPPLIED HOOD
Ventilation:SUFFICIENT TO ENSURE LEL NOT ACHIEVED
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:PROTECT SKIN WITH CLOTHING OR BARRIER CREAM
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:323 TO 390F
Vapor Density:> THAN AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:58

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Hazardous Decomposition Products:CARBON DIOXIDE OR CARBON MONOXIDE ON
COMBUSTION

Disposal

Waste Disposal Methods:AS PER LOCAL AND FEDERAL REGULATIONS FOR
HAZARDOUS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.